Difference between revisions of "Measurements"

From Illomi wiki
Jump to: navigation, search
m
m (Temperature)
Line 10: Line 10:
  
 
== Temperature ==
 
== Temperature ==
 +
Temperature in Illte is measured in пє (peu) /pø:/, and was calibrated using the following calibration points, the average temperature of the water in the [[Tripoolalagoon]] on the coldest day of the year measured over a decade, as the zero point, the average air temperature in [[Tellmarch]] in the shade, on the hottest day of the year measured over a decade, as the 20 point, and the average boiling point of water measured in a boat on the Tripoolalagoon.
 +
 +
To convert from centigrades to пє (peu), subtract 18 from the centigrade value and multiply by 0.8 to get the value in пє (peu).

Revision as of 18:20, 9 June 2016

This page shows different measurements used in Illte.

Lengths

Volumes

Blood pressure

Blood pressure in Illte is measured in lunu of liquid water. A measurement of 0/0 is normal BP. Anything below -2 above or below -4 below are considered to be hypotension, while values above 4 above or above 2 below are considered to be hypertension, where critical hypertension is any value above 12 above or above 6 below.

Lunu BP is converted to mmHg by multiplying the value by 4 and adding 125/85, to a positive value, and 110/75 to a negative value.

Temperature

Temperature in Illte is measured in пє (peu) /pø:/, and was calibrated using the following calibration points, the average temperature of the water in the Tripoolalagoon on the coldest day of the year measured over a decade, as the zero point, the average air temperature in Tellmarch in the shade, on the hottest day of the year measured over a decade, as the 20 point, and the average boiling point of water measured in a boat on the Tripoolalagoon.

To convert from centigrades to пє (peu), subtract 18 from the centigrade value and multiply by 0.8 to get the value in пє (peu).